Drum transfer pumps
The NEPTUNE drum transfer pump from Fluimac offers a reliable and versatile solution for transferring liquids from barrels and containers.
The range is complemented by a wide selection of accessories to customize the pumps to specific requirements, optimizing efficiency and safety when handling a variety of liquids, including neutral, aggressive, and non-flammable liquids.
Quality | Versatility | Affordability | Efficiency | Speed
Drum transfer pumps for every need in liquid transfer
Designed for continuous and uninterrupted operation, NEPTUNE pumps include various pipe and motor types to meet the demands of different industries, ensuring top performance and maximum adaptability in diverse applications.
Drum transfer pump tubes
Polypropylen (PP) - pump tube
Suitable for neutral, aggressive and non-flammable liquids. Used specifically for pumping aggressive chemicals such as acids, alkalis or detergents.
Driveshaft: 316 Stainless Steel or Hastelloy 2.4610. Maximum temperature: 50°C.
Polyvinylidene fluoride (PVDF) - pump tube
Particularly suitable for highly aggressive liquids such as acids and concentrated bases. Driveshaft: Hastelloy 2.4610. Maximum temperature: 90°C.
Aluminium (Alu) - pump tube
Suitable for neutral and non-flammable liquids. Ideal for mineral oil products with a maximum viscosity of 1,000 mPas. Driveshaft: 316 Stainless Steel. Maximum temperature: 90°C.
Stainless Steel - pump tube
Used for all neutral, slightly aggressive liquids such as diluted acids, alkalines or detergents and thin fluid foods. Driveshaft: 316 Stainless Steel. Maximum temperature: 90°C.
Drum transfer pump engines
N-180
230 Volt, 50/60 Hz, 640 Watt, IP 24
N-280
230 Volt, 50/60 Hz, 825 Watt, IP 24
N-ARIA 1
300 Watt at max operating pressure 6 bar, IBEX U05, ATEX B007
N-460
230 Volt, 50/60 Hz, 640 Watt, IP 55, II 2G Ex db IIC T6 Gb
Manual Drum transfer pump
Polypropylen (PP) - manual pump
Pump Material: Polypropylene
Seals: depending on the support
Range: approx. 0.3 l/stroke*
Hose connection: ¾”
The telescopic suction tube is adjustable from 500 to 950 mm and has a max diameter. 34mm.
Polyvinylidene fluoride (PVDF) - manual pump
Pump material: PVDF
Seals: PTFE
Flow rate: 0.3 l/rev*
Suction hose length: 3 x 35 cm
Pump complete with discharge arc and adapter for G 2" drums. Regular lubrication with PTFE is required.
Cast iron body - manual pump
Material: cast iron pump body
Seals: NBR
Flow rate: 0.25 l/rev*
Pump tube diameter: 53mm
Suction hose length: 1000 mm
Therefore suitable for smaller containers and 200 liter drums. Pump complete with discharge arc and adapter for G 2" drums.
Fire brigade version - manual pump
Fire brigade version with flexible suction hose instead of a rigid hose.
Suction hose DN 19 x 4; 1.5m
Drain pipe DN 19 x 4; 1.5m
Range: approx. 0.25 l/stroke*
Drum adapters with M 64x4 and G 2” are integrated into the pump housing, allowing for easy attachment in the drum.
QUALITY
100% of the pumps are tested with water after installation.
SAFETY
Robust construction and chemical-resistant materials.
FLEXIBILITY
Suitable for a wide range of fluids and applications.
Fluimac drum transfer pump, a guarantee of top performance
The drum transfer pumps are designed for continuous, uninterrupted operation and are suitable for a wide range of fluids and applications. They offer a broad selection of flow rates and materials that can be tailored to specific requirements and fluids. Thanks to their optimal and functional design, they ensure high performance, while the robust construction and chemical-resistant materials guarantee durability.
Get in touch with us today!
Let us advise you free of charge - individually and without obligation